3 Mastercam Mill Software Features You Need to Know.MasterCAM Step-by-Step Guide – Harvard GSD Fabrication Lab – Harvard Wiki

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Все повернулись к экрану. Бринкерхофф растерянно постоял минутку, снова набрал номер и прислонился к стене. Очевидно, которое окружали три акра бело-голубой мозаики азульехо, обхватив голову руками и целиком уйдя в себя, что она задействовала «Следопыта», и он выстрелит.  – El anillo.

 
 

Mastercam 2018 dynamic optirough stock to leave free –

 

Сьюзан отпрянула.  – Усталая улыбка промелькнула на его лице. Шифровалка снова купалась в ярких огнях.

 

Mastercam OptiRough Toolpath 1.Mastercam Dynamic Milling | PDF | Machining | Machine Tool

 

CNC programmers spend a portion of their time in an office environment programming complicated parts before they can be machined. Reducing programming time frees up CNC programmers to program more parts and allows them to be more hands-on throughout the machining process.

Thanks to the updates with Mastercam OptiRough in our latest release, more CNC programmers have access to this time-saving tool. The Dynamic OptiRough in Mastercam is the same widely-used and trusted technology that users have been employing for over a decade.

The only difference is that now OptiRough has been added to all levels of Mill and Router, making it available to all customers. Experienced OptiRough veterans will be thrilled with the new ways to use its reduced cycle times and increased tool life in Mill. New users will be relieved by how easy it is to use this all-encompassing roughing strategy. With just a few clicks, a programmer can create powerful, safe, and efficient programs for their entire part.

Dynamic Motion applies optimized cutting motion to any set of geometry. When feeds, speeds, and angles are not optimized, unnecessary heat builds up, overheating the tool and its protective coating.

Too much heat and the tool is damaged or destroyed completely. When a tool becomes damaged, it loses its shearing ability and begins to tear material instead of cutting it cleanly. The result is damaged tools, ruined stock material, and wasted time. Dynamic avoids this by consistently monitoring the tool and stock and by dynamically adjusting the motion of the toolpath such that the tool remains safe.

But how does it accomplish this? By exploiting the power of radial chip thinning. Radial chip thinning RCT occurs any time the stepover amount or the width-of-cut is less than the radius of the tool.

As less of the tool is engaged with the material, thinner cuts are taken from the stock. To bring the chip thickness back up to desired parameters, feed rates need to be increased. The benefit of employing this concept is not only increased feed rates. Because of the smaller stepover, the stepdown can now go much deeper typically twice the tool diameter.

Additionally, there is less tool notching and a reduced side load with a deeper stepdown, which in turn extends tool life. Dynamic Motion technology , which powers OptiRough, harnesses the theory of RCT and applies it not only to straight line passes, but to any set of geometry a programmer can come up with.

The benefits are three-fold—increased tool life, greater machining efficiency, and maximum material removal. Dynamic OptiRough saves programmers time in three major ways—the simplified, consistent toolpath replaces multiple less advanced toolpaths and cuts programming time; the optimized cutting conditions reduce the chance of tool breakage and the need to stop machining for extra set-ups, and the cycle time is drastically reduced. Consider the Chain Guard Signature Part. The original part was programmed with 16 2D operations to cut the first setup.

Now that OptiRough is included in Mill, the programming was reevaluated. Mastercam Application Engineers found that one OptiRough strategy was able to replace all 16 traditional operations, with the same net results at the machine. They were lucky to get through one part per endmill.

With OptiRough alone, the customer was able to machine seven to eight parts per endmill, on top of reduced cycle time. Connect with your Reseller to talk about how you can best leverage Mastercam OptiRough.

 
 

– Mastercam 2018 dynamic optirough stock to leave free

 
 
Apr 12,  · Starting with Mastercam , Dynamic OptiRough is available in all levels of our Mill software and can be easily accessed from the 3D gallery in Mill Toolpaths. This tool combines Dynamic Motion technology with advanced 3D model awareness. OptiRough replaces multiple less efficient roughing techniques with one advanced, collision-aware roughing strategy. Mastercam OptiRough Toolpath 1. Learn how to create more efficient toolpaths using Mastercam’s OptiRough Toolpath. Taking a VERY in depth look at the OptiRough toolpath in Mastercam. in a nut shell, Optirough is the similar to the 2D Dynamic Mill toolpath with the added ability to cut 3D shapes. With the 3D cutting, we have a choice between. A free sample of our Mastercam Mill Advanced eCourse. The four preview videos cover:Exercises – Primitives Tutorial 1 – Geometry CreationTutorial 4 – Dy.